HT14 Mighty Pump
High Head Trash (HT) Pumps balance high lift and high volume capabilities
- Overview
- Performance
- Pump Curve
- Technical Specs
- Pump Materials
- Dimensions
PUMP FEATURES
- High Head Trash (HT) Pumps balance high lift and high volume capabilities
- Variety of pump applications including sewage, liquids, sludge and liquids with solids up to 4.75 inches (120 mm) in diameter
- Standard engine CAT C15 – 475hp, also available in John Deere JD6125H – 549 hp
- Stressproof™ stainless steel shaft with innovative Cycloseal® (Tungsten Carbide vs. Silicon Carbide) that extends seal life- often triple normal mechanical seals
- Unique design that eliminates the need for a gearbox while maintaining high liquid flow rates
- Oil bath feeds the mechanical seal with cooler oil for continuous dry running
- Industrial strength skid built with integral fuel tank.
- Capable of remote monitoring with live updates that include: pump’s global position, discharge pressure, engine data and maintenance log
- Automatic Priming System sucks air and liquid at the same time. Primes and re-primes completely unattended
- Priming system built with in-line ¼ turn isolation valve for flooded suction applications
- At its Best Efficiency Point this pump is 85% efficient, which reduces energy costs compared to other pumps
- Heavy duty, massive pump shafts, purposely built for industrial applications
- Optional, automatic start/stop feature for water level control
- Optional, easily removable protective Quiet Container
- Warranted by MightyPumps™, Cornell and CAT/John Deere – 2 year, 2,000 hour warranty
HT14 PERFORMANCE
- Maximum Outflow
- 10,300 US gpm (38,986 L/min)
- Shutoff Head
- 360 ft (122 m)
- Solids Handling
- 4.75 inches (121 mm) Diameter
- BEP with 15’ lift
- 6,200 US gpm @ 248 ft & 1,750 rpm
HT14 TECHNICAL SPECIFICATIONS
- CAT C15-475 hp Continuous or John Deere JD6125H-549 hp
- Cornell 12NHTB
- Skid
- 99 US gal (375 L)
- 23.4 US gal/hr
- 4.2 hrs
- 1,800 rpm
- 250 psi (1,723 kPa)
- 180°F (82°C)
- 14 inches 150 lb Flange
- 14 inches 150 lb Flange
- 250 US gal
- 10.5 hrs
MATERIAL SPECIFICATIONS
- Volute
- ASTM A536-72 Ductile Iron
- Wear Rings
- ASTM A48 Cast Iron
- Backplate
- ASTM A536-72 Ductile Iron
- Impeller
- ASTM A48 Cast Iron
- Frame
- ASTM A48 Cast Iron
- Shaft
- Stress Proof SAE 1144 Steel
- Shaft Seal
- Tungsten Carbide vs. Silicon Carbide
- Engine Bracket
- ASTM A48 Cast Iron
GENERAL DIMENSIONS
- Height
- 93 inches (2,362 mm)
- Width
- 81 inches (2,057 mm)
- Length
- 172 inches (4,368 mm)
- Weight (Wet)
- 20,309 lbs (9,212 kg)