CP6 Mighty Pump
At its Best Efficiency Point this pump is 68% efficient, which reduces energy costs compared to other pumps
- Overview
- Performance
- Pump Curve
- Technical Specs
- Pump Materials
- Dimensions
PUMP FEATURES
- The CP Series Pumps move large volumes of water
- Variety of pump applications including sewage, liquids, sludge and liquids with solids up to 3 inches (76 mm) in diameter
- Standard engine CAT C4.4 Mechanical-80 hp
- Stressproof™ stainless steel shaft with innovative Cycloseal® (Silicon Carbide vs. Silicon Carbide) that extends seallife – often triple normal mechanical seals
- Oil bath feeds the mechanical seal with cooler oil for continuous dry running
- Steel construction industrial grade trailer with an internal fuel tank; exempt from TDG legislation.Optional highway certified industrial trailer with lights and automatic hydraulic brakes.
- Warranted by MightyPumps™, Cornell and CAT/Yanmar- 2 year, 2,000 hour warranty
- Automatic priming system that sucks air and liquid at the same time. Primes and re-primes completely unattended
- Priming system built with in-line ¼ turn isolation valve for flooded suction applications
- Automatic start/stop feature for water level control
- At its Best Efficiency Point this pump is 68% efficient, which reduces energy costs compared to other pumps
- Heavy duty, massive pump shafts, purpose built for industrial applications
- Optional remote monitoring with live updates that include: pump’s global position, engine data and maintenance log
CP6 PERFORMANCE
- Maximum Outflow
- 2,360 US gpm (8,934 L/min)
- Shutoff Head
- 184 ft (56 m)
- Solids Handling
- 3 inches (76 mm) Diameter
- BEP with 15’ lift
- 1,150 US gpm @ 154 ft & 2,000 rpm
CP6 TECHNICAL SPECIFICATIONS
- Engine
- CAT C4.4 80 hp
- Pump End
- Cornell 6612CP
- Mounting
- Single Axle, Off Road Trailer
- Run Time* (1800 rpm)
- 9.7 hrs
- Fuel Tank Capacity
- 40 US gal (151 L)
- Fuel Consumption (1800 rpm)
- 4.1 US gal/hr
- Maximum Operating Speed
- 2,000 rpm
- Max Case Pressure
- 150 psi (1,034 kPa)
- Max Fluid Temperature
- 180°F (82°C)
- Suction Inlet Size
- 6 inches 150 lb Flange
- Discharge Outlet Size
- 6 inches 150 lb Flange
- *one tank of fuel
MATERIAL SPECIFICATIONS
- Volute
- Ductile Iron
- Wear Rings
- Ductile Iron
- Backplate
- Ductile Iron
- Impeller
- Ductile Iron
- Frame
- Ductile Iron
- Trailer
- CSA G40.21 350W Steel
- Shaft
- 17-4 PH Stainless Steel
- Shaft Seal
- Silicon Carbide vs. Silicon Carbide
- Engine Bracket
- Ductile Iron
GENERAL DIMENSIONS
- Height
- 60 inches (1,524 mm)
- Width
- 66 inches (1,676 mm)
- Length
- 82 inches (2,083 mm)
- Weight (Wet)
- 3,250 lbs (1,474 kg)