DT24 Mighty Pump
- Overview
- Performance
- Pump Curve
- Technical Specs
- Pump Materials
- Dimensions
PUMP FEATURES
OPTIONAL QUIET CONTAINER:
- Optional Protective Quiet Container is easily removable and reduces sound down to 70 dB at 28ft away.
AUTOMATIC START / STOP:
-
50 cubic foot per minute Automatic start/stop priming system only operates when required. The priming system operates less than 10% of the time conserving horsepower for the pump. Internal temperature control and heat jacket which warms the priming system to above 5 degrees before starting the diaphragm pump.
FORKLIFT POCKETS:
-
Forklift Pockets and Tie Down Points built into trailer frame for easy handling and transport.
PUMP:
-
Handles clear liquids, sewage, sludge, and liquids containing solids of up to 4 inches (76 mm) in diameter.
TELEMATICS:
-
Remote Monitoring* for live data streaming, including pumps’ global position, engine data, and maintenance logging.
ENGINE:
-
644 hp John Deere Standard grade, off-road trailer mount
SKID:
-
Internal 99-gallon tank with dual wall containment within the trailer to protect the environment from spills. Industrial strength skid built with integral fuel tank. Also available with steel construction industrial grade, off-road trailer mount.
DT24 PERFORMANCE
- Maximum Outflow
- 31,092 US gpm (117,826 L/min)
- Shutoff Head
- 118 ft (36 m)
- Solids Handling
- 5.25” (133 mm) diameter
- Best Efficiency Point
- 20,800 US gpm @ 90 ft & 700 rpm
DT24 TECHNICAL SPECIFICATIONS
- Engine
- John Deere 6136CI440 664 hp
- Pump End
- Cornell 24NNG
- Mounting
- Industrial Skid
- Fuel Tank Capacity
- 250 US gal/hr
- Fuel Consumption (2000 rpm)
- 27.2 US gal/hr
- Gear Box:
- Twin Disc MG-5114sc-hd 2.48:1”
- Maximum Operating Speed
- 700 rpm
- Max Case Pressure
- 150 psi (1,034 kPa)
- Max Fluid Temperature
- 180° F (82° C)
- Suction Inlet Size
- 24” 150 lb Flange
- Discharge Outlet Size
- 24” 150 lb Flange
MATERIAL SPECIFICATIONS
- Volute
- ASTM A48 Cast Iron
- Wear Rings
- ASTM A48 Cast Iron
- Backplate
- ASTM A536-72 Ductile Iron
- Impeller
- ASTM A48 Cast Iron
- Frame
- ASTM A48 Cast Iron
- Shaft
- Stress Proof SAE 1144 Steel
- Shaft Seal
- Tungsten Carbide vs. Silicon Carbide
- Engine Bracket
- ASTM A48 Cast Iron
GENERAL DIMENSIONS
- Length
- 112 inches (2,845 mm)
- Width
- 88 inches (2,235 mm)
- Height
- 262 inches (6,655 mm)
- Weight
- 32,300 lbs (14,651 kg)
- Optional Fuel Tank Capacity Weight (Wet)
- 34,359 lbs (15,585 kg)