HT12 Mighty Pump
High Head Trash (HT) Pumps balance high lift and high volume capabilities
- Overview
- Performance
- Pump Curve
- Technical Specs
- Pump Materials
- Dimensions
PUMP FEATURES
- High Head Trash (HT) Pumps balance high lift and high volume capabilities
- Variety of pump applications including sewage, liquids, sludge and liquids with solids up to 3.38 inches (86 mm) in diameter
- Standard engine CAT C9 – 350 hp, also available in John Deere JD6081H – 350 hp
- Stressproof™ stainless steel shaft with innovative Cycloseal® (Tungsten Carbide vs. Silicon Carbide) that extends seal life- often triple normal mechanical seals
- Oil bath feeds the mechanical seal with cooler oil for continuous dry running
- Industrial strength skid built with integral fuel tank.
- Capable of remote monitoring with live updates that include: pump’s global position, discharge pressure, engine data and maintenance log
- Automatic Priming System sucks air and liquid at the same time. Primes and re-primes completely unattended
- Priming system built with in-line ¼ turn isolation valve for flooded suction applications
- At its Best Efficiency Point this pump is 82% efficient, which reduces energy costs compared to other pumps
- Heavy duty, massive pump shafts, purposely built for industrial applications
- Optional, automatic start/stop feature for water level control
- Optional, easily removable protective Quiet Container
- Warranted by MightyPumps™, Cornell and CAT/John Deere- 2 year, 2,000 hour warranty
HT12 PERFORMANCE
- Maximum Outflow
- 5,100 US gpm (19,306 L/min)
- Shutoff Head
- 349 ft (106 m)
- Solids Handling
- 3.38 inches (86 mm) Diameter
- BEP with 15’ lift
- 3,697 US gpm @ 219 ft & 1,800 rpm
HT12 TECHNICAL SPECIFICATIONS
- Engine
- CAT C9–350 hp or John Deere JD6081H-350 hp
- Pump End
- Cornell 8NHTA
- Mounting
- Industrial Skid
- Fuel Tank Capacity
- 99 US gal (375 L)
- Fuel Consumption (1800 rpm)
- 15.1 US gal/hr
- Run Time* (1800 rpm)
- 7 hrs
- Maximum Operating Speed
- 1,800 rpm
- Max Case Pressure
- 175 psi (1,206 kPa)
- Max Fluid Temperature
- 180°F (82°C)
- Suction Inlet Size
- 12 inches 150 lb Flange
- Discharge Outlet Size
- 12 inches 150 lb Flange
- Optional Fuel Tank Capacity
- 250 US gal (946 L)
- Optional Fuel Tank Capacity Run Time*
- 17 hrs
- *one tank of fuel
MATERIAL SPECIFICATIONS
- Volute
- ASTM A48 Cast Iron
- Wear Rings
- ASTM A48 Cast Iron
- Backplate
- ASTM A536-72 Ductile Iron
- Impeller
- ASTM A48 Cast Iron
- Frame
- ASTM A48 Cast Iron
- Shaft
- Stress Proof SAE 1144 Steel
- Shaft Seal
- Tungsten Carbide vs. Silicon Carbide
- Engine Bracket
- ASTM A48 Cast Iron
GENERAL DIMENSIONS
- Height
- 111 inches (2,819 mm)
- Width
- 56 inches (1,422 mm)
- Length
- 155 inches (3,937 mm)
- Weight (Wet)
- 8,300 lbs (3,765 kg)
- Optional Fuel Tank Capacity Weight (Wet)
- 9,333 lbs (4,233 kg)