HT16 Mighty Pump
High Head Trash (HT) Pumps balance high lift and high volume capabilities
- Overview
- Performance
- Technical Specs
- Pump Materials
- Dimensions
PUMP FEATURES
- High Head Trash (HT) Pumps balance high lift and high volume capabilities
- Variety of pump applications including sewage, liquids, sludge and liquids with solids up to 3.2 inches (81 mm) in diameter
- Standard engine CAT C32–950 hp
- Stressproof™ stainless steel shaft with innovative Cycloseal® (Tungsten Carbide vs. Silicon Carbide) that increases the seal life by up to three times that of a typical mechanical seal
- Oil bath feeds the mechanical seal with cooler oil for continuous dry running
- Steel construction skid. Also available with an industrial grade, off-road trailer mount
- Capable of remote monitoring with live updates that include: pump’s global position, discharge pressure, engine data and maintenance log
- Automatic Priming System sucks air and liquid at the same time. Primes and re-primes completely unattended
- Priming system built with in-line ¼ turn isolation valve for flooded suction applications
- At its Best Efficiency Point this pump is 82% efficient, which reduces energy costs compared to other pumps
- Heavy duty, massive pump shafts, purposely built for industrial applications
- Optional Water Level Control
- Optional, easily removable protective Quiet Container
- Warranted by Mighty Pumps, Cornell and CAT- 2 year, 2,000 hour warranty
HT16 PERFORMANCE
- Maximum Outflow
- 12,875 US gpm (48,732 L/min)
- Maximum Head
- 410 feet (125 m)
- Solids Handling
- 3.2" (81 mm) Diameter
- BEP with 15’ lift
- 7,000 US gpm @ 335 ft &1200 RPM
HT16 TECHNICAL SPECIFICATIONS
- Engine
- CAT C32–950 hp Continuous
- Pump End
- Cornell 12NHG28
- Gear Box
- Twin Disc MG-5114SC-HD
- Mounting
- Skid
- Fuel Tank Capacity
- 400 US gallons (1,514 L)
- Fuel Consumption (1,800 rpm)
- 45.7 US gal/hr
- Run Time* (1,800 rpm)
- 9 hrs
- Maximum Operating Speed
- 1,200 rpm
- Max Case Pressure
- 200 psi (1,379 kPa)
- Max Fluid Temperature
- 180°F (82°C)
- Suction Inlet Size
- 16 inches 150 lb Flange
- Discharge Outlet Size
- 16 inches 150 lb Flange
- *one tank of fuel
MATERIAL SPECIFICATIONS
- Volute
- ASTM A536-72 Ductile Iron
- Wear Rings
- ASTM A48 Cast Iron
- Backplate
- ASTM A536-72 Ductile Iron
- Impeller
- ASTM A48 Cast Iron
- Frame
- ASTM A48 Cast Iron
- Shaft
- Stress Proof SAE 1144 Steel
- Shaft Seal
- Tungsten Carbide vs. Silicon Carbide
- Engine Bracket
- ASTM A48 Cast Iron
- Skid
- CSA G40.21 44W Steel
GENERAL DIMENSIONS
- Height
- 112 inches (2,845 mm)
- Width
- 81 inches (2,057 mm)
- Length
- 227 inches (5,766 mm)
- Weight (Wet)
- 26,602 lb (12,067 kg)